 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Vertical Cavity Surface Emitting Laser in TO-46 Package * * * * * * * * * Features 850nm VCSEL Technology Data rates up to 2.5 Gbps High thermal stability Low drive current/high output density Narrow and concentric beam angle Recommended for multimode fiber applications TO-46 package with flat lens Burned in for communication level reliability Monitor photodiode Description The OPV310 is a high performance 850nm VCSEL packaged for high speed communication links. OPV310 combines all the performance advantages of a VCSEL with the addition of a power monitor diode for precise control of optical power. The OPV310Y is identical electrically and optically and differs only in pin out. Refer to mechanical drawings for details. This product's combination of features including high speed, high output power and concentric beam makes it an ideal transmitter for integration into all types of data communications equipment. Applications include: Absolute Maximum Ratings (TA = 25 C unless otherwise noted) Storage Temperature Operating Temperature Soldering Lead Temperature Maximum Forward Peak Current Maximum Reverse Voltage Max. Continuous Optical Power at 70C -40 C to +100 C 0 C to +70 C 260 C for 10 Seconds 20 mA 10 V 1.1 mW Fibre Channel Gigabit Ethernet ATM VSR Intra-system links Optical backplane interconnects. Additional laser safety information can be found on the Optek website. See application #221. Classification is not marked on the device due to space limitations. See package outline for centerline of optical radiance. Operating devices beyond maximum rating may cause devices to exceed rated classification September 2003 Issue 3.2 Optek Technology, Inc. Carrollton, Texas 75006 (972) 323-2200 sensor@optekinc.com www.optekinc.com Page 1 of 4 OPV310, OPV310Y Technical Data Electrical/Optical Characteristics (at 25 C unless otherwise specified) SYMBOL POT ITH VF IR RS PARAMETER Total Power Out Threshold Current Forward Voltage Reverse Current Series Resistance Slope Efficiency Linearity MIN 1.50 0.80 1.60 TYP MAX 3.00 2.20 35 UNITS mW mA V nA ohms mW/mA Note1 TEST CONDITION IF = 7 mA IF = 7 mA VR = 5 V Note 2 Note 3 Note 4 20 0.28 0.00 840 850 55 0.6 tr/tf NRI lTH/T /T VFT /T Wavelength Optical Bandwidth Rise and Fall Time Relative Intensity Noise Temp Coefficient of Threshold Current Temp Coefficient of Wavelength Temperature Coefficient for VF Temperature Coefficient for Efficiency 860 0.85 nm nm ps db/Hz mA %/ C mV/ C %/C 0 - 70 C, Note 1 0 - 70 C, IF = 7 mA 0 - 70 C, IF = 7 mA 0 - 70 C, Note 3 20% to 80% 100 -123 1.0 0.06 -2.5 -0.5 Photodiode Electrical Characteristics (at 25 C unless otherwise specified) SYMBOL IRPD IM1 IM2 NOTES: (1) (2) (3) (4) PARAMETER Reverse Current, photo diode Monitor Current Monitor Current MIN 30 40 TYP MAX 30 UNITS nA A A TEST CONDITION VR = 5 V IF = 7 mA PO = 2 mW, VR = 5 V Threshold Current is based on the two line intersection method specified in Telcordia GR-468-Core. Line 1 from 4 mA to 6 mA. Line 2 from 0 mA to 0.5 mA. Series Resistance is the slope of the Voltage-Current line from 5 to 8 mA. Slope efficiency, is the slope of the best fit LI line from 5 mA to 8 mA using no larger than 0.25 mA test interval points. Using data points taken for slope efficiency above, delta L/delta I shall be calculated for each adjacent pair of points. Optek reserves the right to make changes at any time, without notice, in order to improve design and provide the best product possible. September 2003 Issue 3.2 www.optekinc.com Optek Technology, Inc. Carrollton, Texas 75006 (972) 323-2200 sensor@optekinc.com Page 2 of 4 OPV310, OPV310Y Technical Data Normalized Output Power vs. Forward Current Normalized Output Power (7mA, 25 Forward Current (mA) Optek reserves the right to make changes at any time, without notice, in order to improve design and provide the best product possible. September 2003 Issue 3.2 www.optekinc.com Optek Technology, Inc. Carrollton, Texas 75006 (972) 323-2200 sensor@optekinc.com Page 3 of 4 OPV310, OPV310Y Technical Data Invisible Light emits from this surface 1) Tolerances are 0.005 unless otherwise specified 2) Dimensions in inches OPV310 Pin 1 2 3 Connection VCSEL Anode VCSEL Cathode/PD Anode PD Cathode Pin 1 2 3 OPV310Y Connection VCSEL Cathode VCSEL Anode/PD Cathode PD Anode Optek reserves the right to make changes at any time, without notice, in order to improve design and provide the best product possible. September 2003 Issue 3.2 www.optekinc.com Optek Technology, Inc. Carrollton, Texas 75006 (972) 323-2200 sensor@optekinc.com Page 4 of 4 |
Price & Availability of OPV310
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |